English
FrançaisRegulations
Page 132 of 140, showing 20 records out of 2786 total, starting on record 2621, ending on 2640
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US IEC 60076-2:2011, Power transformers — Part 2: Temperature rise for liquid-immersed transformers | This Uganda Standard applies to liquid-immersed transformers, identifies power transformers according to their cooling methods, defines temperature rise limits and gives the methods for temperature rise tests. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 60076-3:2013, Power transformers — Part 3: Insulation levels, dielectric tests and external clearances in air | This Uganda Standard applies to power transformers as defined by and in the scope of US IEC 60076-1. It gives details of the applicable dielectric tests and minimum dielectric test levels. Recommended minimum external clearances in air between live parts and between live parts and earth are given for use when these clearances are not specified by the purchaser. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 60076-5:2006, Power transformers — Part 5: Ability to withstand short circuit | This Uganda Standard identifies the requirements for power transformers to sustain without damage the effects of overcurrent originated by external short circuits. It describes the calculation procedures used to demonstrate the thermal ability of a power transformer to withstand such over currents and both the special test and the theoretical evaluation method used to demonstrate the ability to withstand the relevant dynamic effects. The requirements apply to transformers as defined in the scope of US IEC 60076-1. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 60282-1:2014, High-voltage fuses — Part 1: Current-limiting fuses | This Uganda Standard applies to all types of high-voltage current-limiting fuses designed for use outdoors or indoors on alternating current systems of 50 Hz and 60 Hz and of rated voltages exceeding 1 000 V. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 60282-2:2008, High-voltage fuses — Part 2: Expulsion fuses | This Uganda Standard specifies requirements for expulsion fuses designed for use outdoors or indoors on alternating current systems of 50 Hz and 60 Hz, and of rated voltages exceeding 1 000 V. This standard covers only the performance of fuses, each one comprising a specified combination of fuse-base, fuse-carrier and fuse-link which have been tested in accordance with this standard; successful performance of other combinations cannot be implied from this standard. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US EAS 127-2:2014, Synthetic detergent powders — Specification — Part 2: Machine wash | This Uganda Standard specifies the requirements and methods of sampling and test for synthetic detergents for machine wash. It does not cover hand wash powders and industrial detergent powders. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US EAS 812-1:2015, Liquid hand wash — Specification — Part 1: Synthetic and combined (soap and synthetic) hand wash | This Uganda Standard specifies the requirements and methods of test for synthetic and combined (soap and synthetic) hand wash. This standard does not apply to soap-based hand wash. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US EAS 815: 2015, Soap noodles — Specification | This Uganda Standard specifies requirements and methods of test for soap noodles used as an intermediate product for subsequent conversion into a marketable soap. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US EAS 816-1: 2015, Synthetic liquid laundry detergents — Specification — Part 1: Hand wash | This Uganda Standard specifies the requirements and methods of sampling and test for machine wash synthetic liquid laundry detergents. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US EAS 816-2:2015, Synthetic liquid laundry detergents — Specification — Part 2: Machine wash | This Uganda Standard specifies the requirements and methods of sampling and test for machine wash synthetic liquid laundry detergents. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US EAS 817:2015, Stain remover for tableware — Specification | This Uganda Standard specifies the requirements and methods of test for a stain remover used in hard or soft water to remove coffee, tea and other adsorbed food stains, primarily from plastic tableware, by immersion. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US 191: 2016 Petroleum jelly — Specification (3rd Edition) | This Uganda Standard specifies the requirements and methods of sampling and test for petroleum jelly for cosmetic use. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 10333-1:2000, Personal fall-arrest systems — Part 1: Full-body harnesses | This Uganda Standard specifies the requirements, test methods, instructions for general use, marking, packaging and maintenance for full-body harnesses (FBH). The main purpose of a FBH is to allow the user to connect into a personal fall-arrest system (PFAS), which will be specified in a future International Standard (see US ISO 10333-6 in the Bibliography), such that if an arrest takes place, the arresting force will not exceed 6 kN. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 11611:2015, Protective clothing for use in welding and allied processes (2nd Edition) | This Uganda Standard specifies minimum basic safety requirements and test methods for protective clothing including hoods, aprons, sleeves and gaiters that are designed to protect the wearer's body including head (hoods) and feet (gaiters) and that are to be worn during welding and allied processes with comparable risks. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 11612:2015, Protective clothing — Clothing to protect against heat and flame — Minimum performance requirements | This Uganda Standard specifies performance requirements for protective clothing made from flexible materials, which are designed to protect the wearer's body, except the hands, from heat and/or flame. For protection of the wearer's head and feet, the only items of protective clothing falling within the scope of this standard are gaiters, hoods, and over boots. However, concerning hoods, requirements for visors and respiratory equipment are not given. The performance requirements set out in this standard are applicable to protective clothing which could be worn for a wide range of end uses, where there is a need for clothing with limited flame spread properties and where the user can be exposed to radiant or convective or contact heat or to molten metal splashes. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 12609-1:2013, Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications — Part 1: Specification for products | This Uganda Standard specifies performance and labelling of eye protectors used for ILS equipment used on humans and animals for cosmetic and medical applications against excessive exposure to optical radiation in the spectral range 250 nm to 3 000 nm, with the exception of laser radiation. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 12609-2:2013, Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications — Part 2: Guidance for use | This Uganda Standard gives guidance and information to users, manufacturers, suppliers, and safety advisors on the selection and use of eye protectors for intense light source (ILS) equipment used on humans and animals for cosmetic and medical applications against excessive exposure to optical radiation in the spectral range 250 nm to 3 000 nm, with the exception of laser radiation. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 13688:2013, Protective clothing -- General requirements | This Uganda Standard specifies general performance requirements for ergonomics, innocuousness, size designation, ageing, compatibility and marking of protective clothing and the information to be supplied by the manufacturer with the protective clothing. US ISO 13688:2012 is only intended to be used in combination with other standards containing requirements for specific protective performance and not on a stand-alone basis | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO/TS 16976-1:2015, Respiratory protective devices — Human factors — Part 1: Metabolic rates and respiratory flow rates | This Uganda Standard provides information on factors related to human anthropometry, physiology, ergonomics, and performance for the preparation of standards for performance requirements, testing, and use of respiratory protective devices. This part of US ISO/TS 16976 contains information related to respiratory and metabolic responses to rest and work at various intensities. Information is provided for the following: metabolic rates associated with various intensities of work; oxygen consumption as a function of metabolic rate and minute ventilation for persons representing three body sizes; peak inspiratory flow rates during conditions of speech and no speech for persons representing three body sizes as a function of metabolic rates. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO/TS 16976-2:2015, Respiratory protective devices — Human factors — Part 2: Anthropometrics | This Uganda Standard provides information on factors related to human anthropometry, physiology, ergonomics, and performance for the preparation of standards for design, testing, and use of respiratory protective devices. It contains information related to anthropometry. In particular, information is given for: anthropometric measurement methods; anthropometric data for head, face, and neck dimensions; anthropometric data for torso dimensions; human test panels; models of headforms | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
