English
FrançaisRegulations
Page 130 of 140, showing 20 records out of 2786 total, starting on record 2581, ending on 2600
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US 1635 2016, Shea butter – Specification | This Uganda Standard specifies requirements, sampling and test methods for shea butter Vitellaria paradoxa derived from the kernels of the nut of Vitellaria paradoxa | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 02 September 2016 |
| US CODEX STAN 318:2014, Standard for Okra | This Uganda Standard applies to commercial varieties of okra grown from varieties of Abelmoschus esculentus (L.) Moench (syn. Hibiscus esculentus L.) of the Malvaceae family, to be supplied fresh to the consumer after preparation and packaging. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 02 September 2016 |
| US ISO 959-2:1998, Pepper (Piper nigrum L.), whole or ground – Specification – Part 2: White pepper | This part of Uganda Standard specifies requirements for white pepper (Piper nigrum L.), whole or ground, at the following commercial stages: a) semi-processed (SP); b) processed (P). It is not applicable to white pepper categories called "light". | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 02 September 2016 |
| US ISO 972:1997, Chillies and capsicums, whole or ground (powdered) – Specification | This Uganda Standard specifies requirements for chillies and capsicums in the whole or ground (powdered) form. It does not apply to “chili powder” and paprika | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 02 September 2016 |
| US ISO 973:1999, Pimento (allspice) [Pimenta dioica (L.) Merr.], whole or ground – Specification | This Uganda Standard specifies requirements for pimento or allspice [Pimentadioica (L.) Merr.], whole or ground. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 02 September 2016 |
| US ISO 3632-1:2011, Spices – Saffron (Crocus sativus L.) – Part 1: Specification | This Uganda Standard establishes specifications for dried saffron obtained from the pistils of Crocus sativus L. flowers. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 02 September 2016 |
| US ISO 6465:2009, Spices – Cumin (Cuminum cyminum L.) – Specification (2nd Edition) | This Uganda Standard specifies requirements for fruits of cumin (Cuminum cyminum L.) | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 02 September 2016 |
| US ISO 6539:2014, Cinnamon (Cinnamomum zeylanicum Blume) – Specification (2nd Edition) | This Uganda Standard specifies requirements for whole or ground (powdered) cinnamon, of the Sri Lankan, Madagascan and Seychelles types obtained from the bark of the tree or shrub Cinnamomum zeylanicum Blume. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 02 September 2016 |
| US ISO 11178:1995, Star anise (Illicium verum Hook. f.) – Specification | This Uganda Standard specifies requirements for the dried fruits of the star anise tree (Illicium verum Hook. f.). | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6361-1:2011, Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 1: Technical conditions for inspection and delivery | This Uganda Standard specifies the technical conditions for inspection and delivery of wrought aluminium and aluminium alloy sheets, strips and plates for general engineering applications. It applies to flat-rolled products with a thickness over 0.15 mm up to and including 400 mm. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6361-2:2014, Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 2: Mechanical properties | This Uganda Standard specifies the mechanical properties of wrought aluminium and aluminium alloy sheets, strips, and plates for general engineering applications. It applies to flat-rolled products. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6361-3:2014, Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 3: Strips: Tolerances on shape and dimensions | This Uganda Standard specifies the tolerances on shape and dimensions for wrought aluminium and aluminium alloy strip by cold-rolling for general engineering applications. It applies to products with thickness of over 0.15 mm up to, and including 16 mm. It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock), or to special products such as those that are corrugated or embossed. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6361-4:2014, Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 4: Sheets and plates: Tolerances on shape and dimensions | This Uganda Standard specifies the tolerances on shape and dimensions for wrought aluminium and aluminium alloy sheet and plate by hot-rolling or cold-rolling for general engineering applications. It applies to products with a thickness over 0,15 mm up to and including 203 mm. It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock) or to special products, such as those that are corrugated or embossed. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6361-5:2011, Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 5: Chemical composition | This Uganda Standard specifies the chemical composition of wrought aluminium and aluminium alloys. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6362-1:2012, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 1: Technical conditions for inspection and delivery | This Uganda Standard specifies the technical conditions for inspection and delivery of wrought aluminium and aluminium alloy rods/bars, tubes and profiles for general engineering applications. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6362-2:2014, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties | This Uganda Standard specifies the mechanical properties of wrought aluminium and aluminium alloy extruded rods/bars, tubes, and profiles for general engineering applications. It applies to extruded products. | 2016-08-12 | National Forest Authority | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6362-3:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 3: Extruded rectangular bars — Tolerances on shape and dimensions | This Uganda Standard specifies the tolerances on dimensions and shape of wrought aluminium and aluminium alloy extruded rectangular bars, having thicknesses in the range from 2 mm up to 240 mm and widths in the range from 10 mm up to 600 mm. It applies to extruded rectangular bars. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6362-4:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 4: Profiles — Tolerances on shape and dimensions | This Uganda Standard specifies the tolerances on dimensions and shape of wrought aluminium and aluminium alloy extruded profiles with a cross-section contained within a circumscribing circle not greater than 800 mm. This part of US ISO 6362 applies to extruded profiles for general engineering applications only. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6362-5:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 5: Round, square and hexagonal bars — Tolerances on shape and dimensions | This Uganda Standard specifies the tolerances on dimensions and shape of the following: • wrought aluminium and aluminium alloy extruded round bars, having diameters in the range from 8 mm up to 350 mm; • wrought aluminium and aluminium alloy extruded square and hexagonal bars, having widths across flats in the range from 10 mm up to 220 mm. It applies to extruded round, square and hexagonal bars. | 2016-08-12 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 03 September 2016 |
| US ISO 6362-6:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 6: Round, square, rectangular and hexagonal tubes — Tolerances on shape and dimensions | This Uganda Standard specifies the tolerances on dimensions and shape of wrought aluminium and aluminium alloy extruded round bars having diameters in the range from 8 mm up to 350 mm; and square and hexagonal bars having widths across flats in the range from 10 mm up to 220 mm. It applies to extruded round, square and hexagonal bars. | 2016-08-12 | The Uganda National Bureau of standards | 03 September 2016 |
