English
FrançaisRegulations
Page 131 of 140, showing 20 records out of 2786 total, starting on record 2601, ending on 2620
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US ISO 6362-7:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 7: Chemical composition | This Uganda Standard specifies the chemical composition of wrought aluminium and aluminium alloys. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 209:2007, Aluminium and aluminium alloys — Chemical composition | This Uganda Standard specifies the designations indicating the chemical composition of aluminium and aluminium alloys. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US 1642:2016, Domestic biogas stoves — Specification | This Uganda Standard covers construction, operation, safety requirements and methods of test for stoves intended for use with domestic biogas systems. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US 1643:2016, Domestic biogas lamp — Specification | This Uganda Standard covers construction, operation, safety requirements, sampling and methods of test for lamps intended for use with biogas | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US 194-1:2016, Nails — Part 1: Steel nails — Specification | This Uganda Standard specifies requirements for preferred form and dimensions, tolerance on dimensions, finish and surface coating for the type of steel nails and of loose steel wire nails for general applications. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 1461:2009, Hot dip galvanized coatings on fabricated iron and steel articles — Specification and test methods | This Uganda Standard specifies the general properties of coatings and test methods for coatings applied by dipping fabricated iron and steel articles (including certain castings) in a zinc melt (containing not more than 2 % of other metals). | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 16120-1:2011, Non-alloy steel rod for drawing and/or cold rolling — Part 1: General requirements | This Uganda Standard is applicable to wire rod of non-alloy steel intended for wire drawing and/or cold rolling. The cross-section can be circular, oval, square, rectangular, hexagonal, octagonal, half-round or another shape, generally with at least 5 mm nominal dimension, and with a smooth surface. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 16120-2:2011, Non-alloy steel rod for drawing and/or cold rolling — Part 2: Specific requirements for general purpose rod | This Uganda Standard is applicable to general-purpose steel wire rod for drawing and/or cold rolling. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 16120-3:2011, Non-alloy steel rod for drawing and/or cold rolling — Part 3: Specific requirements for nominal and rimmed substitute low carbon steel rod | This Uganda Standard is applicable to wire rod made of low-carbon, low-silicon, rimmed and rimmed substitute steel with high ductility intended for drawing and/or cold rolling. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 16120-4:2011, Non-alloy steel rod for drawing and/or cold rolling — Part 4: Specific requirements for wire rod for special applications | This Uganda Standard is applicable to steel wire rod with improved characteristics intended for drawing and/or cold rolling. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 61427-1:2013, Secondary cells and batteries for renewable energy storage — General requirements and methods of test — Part 1: Photovoltaic off-grid application | This Uganda Standard gives general information relating to the requirements for the secondary batteries used in photovoltaic energy systems and to the typical methods of test used for the verification of battery performances. This part deals with cells and batteries used in photovoltaic off-grid applications. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 61427-2:2015; Secondary cells and batteries for renewable energy storage — General requirements and methods of test — Part 2: On-grid applications | This Uganda Standard relates to secondary batteries used in on-grid Electrical Energy Storage (EES) applications and provides the associated methods of test for the verification of their endurance, properties and electrical performance in such applications. The test methods are essentially battery chemistry neutral, i.e. applicable to all secondary battery types. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 60904-2:2015, Photovoltaic devices – Part 2: Requirements for photovoltaic reference devices | This Uganda Standard gives requirements for the classification, selection, packaging, marking, calibration and care of photovoltaic reference devices. This standard covers photovoltaic reference devices used to determine the electrical performance of photovoltaic cells, modules and arrays under natural and simulated sunlight. It does not cover photovoltaic reference devices for use under concentrated sunlight. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US US IEC 61215-1:2016, Terrestrial photovoltaic (PV) modules — Design qualification and type approval — Part 1: Test requirements | This Uganda Standard lays down IEC requirements for the design qualification and type approval of terrestrial photovoltaic (PV) modules suitable for long term operation in general open air climates, as defined in IEC 60721-2-1 | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 61215-1-1:2016, Terrestrial photovoltaic (PV) modules — Design qualification and type approval — Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules | This Uganda Standard lays down IEC requirements for the design qualification and type approval of terrestrial photovoltaic modules suitable for long-term operation in general open air climates, as defined in IEC 60721-2-1 | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 61215-2:2016, Terrestrial photovoltaic (PV) modules — Design qualification and type approval — Part 2: Test procedures | This Uganda Standard lays down IEC requirements for the design qualification and type approval of terrestrial photovoltaic modules suitable for long-term operation in general open air climates, as defined in IEC 60721-2-1. This part of US IEC 61215 is intended to apply to all terrestrial flat plate module materials such as crystalline silicon module types as well as thin-film modules. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 60432-1:1999+AMD1:2005+AMD2:2011, Incandescent lamps — Safety specifications — Part 1: Tungsten filament lamps for domestic and similar general lighting purposes | This Uganda Standard specifies the safety and interchangeability requirements of tungsten filament incandescent lamps for general lighting service | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 60095-1:2006, Lead-acid starter batteries — Part 1: General requirements and methods of test | This Uganda Standard is applicable to lead-acid batteries with a nominal voltage of 12 V, used primarily as a power source for the starting of internal combustion engines, lighting and for auxiliary equipment of internal combustion engine vehicles. These batteries are commonly called "starter batteries". This standard specifies general requirements; essential functional characteristics, relevant test methods and results required, for several classes of starter batteries; according to the general type of application; and according to the type of product. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 60095-2:2009, Lead-acid starter batteries — Part 2: Dimensions of batteries and dimensions and marking of terminals | This Uganda Standard is applicable to lead-acid batteries used for starting, lighting and ignition of passenger cars and light vehicles with a nominal voltage of 12 V. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US IEC 60076-1:2011, Power transformers — Part 1: General | This Uganda Standard applies to three-phase and single-phase power transformers (including auto-transformers) with the exception of certain categories of small and special transformers such as: single-phase transformers with rated power less than 1 kVA and three-phase transformers less than 5 kVA; transformers, which have no windings with rated voltage higher than 1 000 V; instrument transformers; amongst others. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
