English
FrançaisRegulations
Page 2 of 140, showing 20 records out of 2786 total, starting on record 21, ending on 40
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US ISO 6362-5:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 5: Round, square and hexagonal bars — Tolerances on shape and dimensions | This Uganda Standard specifies the tolerances on dimensions and shape of the following: • wrought aluminium and aluminium alloy extruded round bars, having diameters in the range from 8 mm up to 350 mm; • wrought aluminium and aluminium alloy extruded square and hexagonal bars, having widths across flats in the range from 10 mm up to 220 mm. It applies to extruded round, square and hexagonal bars. | 2016-08-12 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 03 September 2016 |
| US ISO 6698:1989, Cycles — Screw threads used to assemble freewheels on bicycle hubs | This Uganda Standard specifies the thread profile and limits and tolerances for the screw threads used to assemble freewheels on bicycle hubs. It is based on the use of the ISO basic thread profile given in ISO 68; satisfactory interchangeability with the corresponding British Standard Cycle (B.S.C.) thread; this has required the use of an inch pitch (t.p.i.);the use of screw thread tolerance grades and tolerance positions given in ISO 965-l1; and the use of gauges made to ISO 1502. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
| US IEC 60502-4:2010, Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 4: Test requirements on accessories for cables with rated voltages from 6 kV (Um = 7,2 kV) up | This Uganda Standard specifies the test requirements for type testing of accessories for power cables with rated voltages from 3,6/6 (7,2) kV up to 18/30 (36) kV, complying with IEC 60502-2. (This Uganda Standard cancels and replaces, US EAS 506-4:2008, Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1.2 kV) up to 30 kV (Um = 36 kV) — Part 4: Test requirements on accessories for cables with rated voltages from 6 kV (Um = 7.2 kV) up to 30 kV (Um = 36 kV), which has been republished) | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 24 August 2016 |
| US EAS 811-1: 2014, Code of practice for safety of electrical installations — Part 1: General | This Uganda Standard specifies the terms and definitions, symbols and methods of earthing of electrical supply, communication facilities and associated equipment. It applies to all new and existing installations and extensions. This standard does not cover the earthed return of electric railways nor those lightning protection wires that are normally independent of supply or communication wires or equipment. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US ISO 15546:2011, Petroleum and natural gas industries — Aluminium alloy drill pipe | This Uganda Standard specifies the technical delivery conditions, manufacturing process, material requirements, configuration and dimensions, and verification and inspection procedures for aluminium alloy drill pipes with or without attached steel tool joints, for use in drilling and production operations in the petroleum and natural gas industries. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 15463:2003, Petroleum and natural gas industries — Field inspection of new casing, tubing and plain-end drill pipe | This Uganda Standard specifies the technical delivery conditions, manufacturing process, material requirements, configuration and dimensions, and verification and inspection procedures for aluminium alloy drill pipes with or without attached steel tool joints, for use in drilling and production operations in the petroleum and natural gas industries. | 2015-08-07 | The Uganda National Bureau of standards | THE UGANDA GAZETTE Vol. CVIII No. 43 of 7 August 2015 | 25 August 2016 |
| US ISO 11960:2014, Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells | This Uganda Standard specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints), coupling stock, coupling material and accessory material and establishes requirements for three Product Specification Levels (PSL-1, PSL-2, PSL-3). | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 18 August 2016 |
| US ISO 11961:2008, Petroleum and natural gas industries — Steel drill pipe | This Uganda Standard specifies the technical delivery conditions for steel drill-pipes with upset pipe-body ends and weld-on tool joints for use in drilling and production operations in petroleum and natural gas industries for three product specification levels (PSL-1, PSL-2 and PSL-3). | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 18 August 2016 |
| US ISO 13680:2010, Petroleum and natural gas industries — Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock — Technical delivery conditions | This Uganda Standard specifies the technical delivery conditions for corrosion-resistant alloy seamless tubulars for casing, tubing and coupling stock. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 16 August 2016 |
| US ISO 13085:2014, Petroleum and natural gas industries — Aluminium alloy pipe for use as tubing for wells | This Uganda Standard specifies the technical delivery condition, manufacturing process, material requirements, configuration and dimensions, and verification and inspection procedures for aluminium alloy pipes for use as tubing for wells in petroleum and natural gas industries. | 2015-08-07 | The Uganda National Bureau of standards | 25 August 2016 | |
| US ISO 27627:2014, Petroleum and natural gas industries — Aluminium alloy drill pipe thread connection gauging | This Uganda Standard specifies the technical delivery condition, manufacturing process, material requirements, configuration and dimensions, and verification and inspection procedures for aluminium alloy drill pipes manufactured in accordance with US ISO 15546. | 2015-08-07 | The Uganda National Bureau of standards | 25 August 2016 | |
| US ISO 6361-1:2011, Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 1: Technical conditions for inspection and delivery | This Uganda Standard specifies the technical conditions for inspection and delivery of wrought aluminium and aluminium alloy sheets, strips and plates for general engineering applications. It applies to flat-rolled products with a thickness over 0.15 mm up to and including 400 mm. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6362-1:2012, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 1: Technical conditions for inspection and delivery | This Uganda Standard specifies the technical conditions for inspection and delivery of wrought aluminium and aluminium alloy rods/bars, tubes and profiles for general engineering applications. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 1307:2006, Rubber and plastics hoses — Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses | This Uganda Standard specifies the sizes of rubber and plastics hoses and the minimum and maximum inside diameters permitted for each hose size. For this purpose, hoses are divided into four types according to the process by which they are manufactured. The standard also specifies tolerances on cut-to-length rubber and plastics hoses for industrial and automotive applications. This standard is intended to be used with the relevant hoses product standard unless there is justification for using a different hose size or unless a hose size needs a different inside-diameter range for a particular application | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 17 September 2016 |
| US 310-2:2016, Cement — Part 2: Conformity evaluation (2nd Edition) | This Uganda Standard specifies the scheme for the assessment and verification of constancy of performance (AVCP) of cements to their corresponding product specification standards, including certification of constancy of performance by a product certification body. (The Uganda Standard cancels and replaces US 310-2:2000, Cement — Part 2: Conformity evaluation, which has been technically revised). | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US EAS 811-2:2014, Code of practice for safety of electrical installations — Part 2: Installation and maintenance of electric supply stations and equipment | This Uganda Standard specifies the safety requirements for installations, operations and maintenance of electric supply stations. It also provides safety guidelines to personnel involved in electric supply stations and their associated structural arrangements that are accessible only to qualified personnel. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 14 September 2016 |
| US IEC 60432-1:1999+AMD1:2005+AMD2:2011, Incandescent lamps — Safety specifications — Part 1: Tungsten filament lamps for domestic and similar general lighting purposes | This Uganda Standard specifies the safety and interchangeability requirements of tungsten filament incandescent lamps for general lighting service | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 7240-11:2011, Fire detection and alarm systems — Part 11: Manual call points | This Uganda Standard specifies the requirements; test methods and performance criteria for manual call points in fire detection and alarm systems in and around buildings (see US ISO 7240-1). It takes into account indoor and outdoor conditions, the appearance and operation of the manual call points for type A “direct operation” and type B “indirect operation”, and covers those which are simple mechanical switches, those which are fitted with simple electronic components (e.g. resistors, diodes) and those which contain active electronic components and which work with the control and indicating equipment for signalling and identifying, for example, an address or location. This standard does not cover manual call points for special applications, for example manual call points that are intrinsically safe or for use in hazardous conditions, if such applications require additional or other requirements or tests than those given in this standard. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 30 September 2016 |
| US ISO 10333-1:2000, Personal fall-arrest systems — Part 1: Full-body harnesses | This Uganda Standard specifies the requirements, test methods, instructions for general use, marking, packaging and maintenance for full-body harnesses (FBH). The main purpose of a FBH is to allow the user to connect into a personal fall-arrest system (PFAS), which will be specified in a future International Standard (see US ISO 10333-6 in the Bibliography), such that if an arrest takes place, the arresting force will not exceed 6 kN. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 7240-23:2013, Fire detection and alarm systems — Part 23: Visual alarm devices | This Uganda Standard specifies the requirements, test methods and performance criteria for visual alarm devices in a fixed installation intended to signal a visual warning of a fire between a fire detection and alarm system and occupants in and around buildings. This standard specifies visual alarm devices for three types of application environment. It is only applicable to pulsing or flashing visual alarm devices, for example xenon beacons or rotating beacons. It is not applicable to devices giving continuous light output. This standard is not intended to cover visual indicators, for example, on detectors or on the control and indicating equipment. | 2015-04-21 | The Uganda National Bureau of standards | UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 | 03 October 2016 |
