English
FrançaisRegulations
Page 1 of 140, showing 20 records out of 2786 total, starting on record 1, ending on 20
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| The Malawi Gazette Suppliment, dated 13th February 2015 | Wheat flour for human wheat consumption prepared from common wheat. | 2014-06-01 | Malawi Bureau of Standards | Malawi Bureau of Standards Act, 2012 | 29 September 2016 |
| BOS 41-1:2001 13 A plugs, socket-outlets, adaptors and connection units Part 1: Rewirable and non-rewirable 13 A fused plugs ― Specification | Unless otherwise specified in this part of BOS 41, the plugs shall be tested as delivered by the manufacturer. Plugs shall be deemed to comply if no specimen fails in the complete series of tests given in Table 1. | 2001-07-06 | Botswana Bureau of Standards | Standards (Import Inspection) Regulations, 2008 (SIIR) | 13 July 2017 |
| ZS 437 Part 2 2002 Pneumatic tyres - Specifications | Uniform Provisions concerning the approval of tyres for commercial vehicles and their traillers (E/ECE/324,E/ECE/TRAS/505) Covers new pneumatic tyres designed primarily, but not only, for vehicles in categories M2, M3, N and O3 and O4. ∗/ However, it does not apply to tyre types identified by speed category symbols corresponding to speeds below 80 km/h. Includes quality requirements, marking, testing and conformity assessment | 2003-07-18 | Zambia Bureau of Standards (ZABS) | Statutory Instrument No. 78 of 2003 | 14 July 2017 |
| TZS 1660:2014, Polyurethane (PU) coated leather — Specification | TZS 1660:2014, Polyurethane (PU) coated leather - Specification This standard prescribes requirements, methods of sampling and test for polyurethane (PU) coated leather. | 2014-12-18 | Tanzania Bureau of Standards (TBS) | 14 September 2016 | |
| ZS 432 Part 1: 2002 Safety for Incandescent Lamps - Specification Part 1:Tungsten filament lamps for domestic and similar general lighting purposes. | Tungsten filament lamps for domestic and similar general lighting purposes. Covers marking and quality requirements | 2003-07-18 | Zambia Bureau of Standards (ZABS) | Statutory Instrument No. 78 of 2003 | 12 July 2017 |
| TZS 72: 2014 Toothpaste — Specification | Tooth paste – Specification Prescribes requirements and the methods of test for toothpaste. | 2014-12-18 | Tanzania Bureau of Standards (TBS) | TZS 72: 2014 Toothpaste — Specification | 30 September 2016 |
| Chemical Weapons Convention Act 2003 | To give effect to the Convention of the Prohibition of the Development, Production, Stockpiling and Use of Chemical Weapons and on their Destruction | 2004-02-16 | Attorney General | Proclamation No. 2 of 2003 | 12 May 2016 |
| Plugs, socket outlets, and socket outlet adaptors- Specification | Three-pin plugs, socket outlets and socket outlet adaptors | 2014-06-01 | Malawi Bureau of Standards | 04 October 2016 | |
| Plugs, socket outlets, and socket outlet adaptors | Three-pin plugs | 2014-06-01 | Malawi Bureau of Standards | 04 October 2016 | |
| INSPECTION OF ALL IMPORTS FOR ISSUANCE OF CERTIFICATES OF CONFORMITY | This updated requirement has been found necessary in order to curb importation of substandard and illicit goods to protect the safety and health of consumers.These inspections will be undertaken by KEBS appointed Inspection agents as provided for under Legal Notice No. 78 of 15thJuly 2005 on the Verification of Conformity to Standards (PVoC) of Imports order | 2015-12-01 | Kenya revenue authority/Kenya bureau of Standards | Legal Notice No. 78 of 15thJuly 2005 on the Verification of Conformity to Standards (PVoC) of Imports order.Updated by legal notice of 1st Nove 2015 | 18 January 2016 |
| US 1042:2013, Alcoholometers and alcohol hydrometer; and thermometers for use in alcoholometry— Specification | This Uganda Standards specifies the requirements for alcoholometers and alcohol hydrometers used for the determination of the alcoholic strength of mixtures of water and ethanol, and to thermometers for use in alcoholometry. It sets out technical and metrological specifications for these instruments, in accordance with International Alcoholometric Tables. This standard covers glass hydrometers indicating percentage alcoholic strength by mass, referred to as mass alcoholometers, glass hydrometers indicating percentage alcoholic strength by volume, referred to as volume alcoholometers, and glass hydrometers indicating density in kilogram per cubic metre, referred to as alcohol hydrometers. | 2013-10-25 | The Uganda National Bureau of standards | Uganda Gazette Vol. CV No. 54 of 25th October 2013 | 03 May 2017 |
| US 1030:2013, Quantity of product in prepackages (2nd Edition) | This Uganda Standards specifies the legal Metrology requirements for prepackaged products (also called prepackaged commodities or prepackaged goods) labelled in predetermined constant nominal quantities of weight, volume, linear measure, area, or count; and sampling plans and procedures for use by legal metrology officials in verifying the quantity of product in prepackages. | 2013-10-25 | The Uganda National Bureau of standards | Uganda Gazette Vol. CV No. 54 of 25th October 2013 | 03 May 2017 |
| US ISO 17916:2016, Safety of thermal cutting machines | This Uganda Standards pecifies the safety requirements and measures for machinery covering design, construction, production, transport, installation, operation, maintenance, and putting out of service. This standard applies to machinery using thermal cutting and or marking processes such as oxy-fuel, plasma arc. This standard applies to machinery the basis of which is either designed as open gantry, cantilever machine, or the track of which is incorporated in the cutting table. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 10438-3:2007, Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 3: General-purpose oil systems | This Uganda Standard, in conjunction with US ISO 10438-1, specifies requirements for oil systems for general purpose applications. These oil systems can provide lubrication oil, but not seal oil and can serve equipment such as compressors, gears, pumps. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 12 August 2016 |
| US ISO 10438-2:2007, Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 2: Special-purpose oil systems | This Uganda Standard, in conjunction with of US ISO 10438-1, specifies requirements for oil systems for special purpose applications. These oil systems can provide lubrication oil, seal oil or both. These systems can serve equipment such as compressors, gears, pumps and drivers. | 2015-12-15 | The Uganda National Bureau of standards | The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016 | 12 August 2016 |
| US ISO 6361-3:2014, Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 3: Strips: Tolerances on shape and dimensions | This Uganda Standard specifies the tolerances on shape and dimensions for wrought aluminium and aluminium alloy strip by cold-rolling for general engineering applications. It applies to products with thickness of over 0.15 mm up to, and including 16 mm. It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock), or to special products such as those that are corrugated or embossed. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6361-4:2014, Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 4: Sheets and plates: Tolerances on shape and dimensions | This Uganda Standard specifies the tolerances on shape and dimensions for wrought aluminium and aluminium alloy sheet and plate by hot-rolling or cold-rolling for general engineering applications. It applies to products with a thickness over 0,15 mm up to and including 203 mm. It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock) or to special products, such as those that are corrugated or embossed. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6362-6:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 6: Round, square, rectangular and hexagonal tubes — Tolerances on shape and dimensions | This Uganda Standard specifies the tolerances on dimensions and shape of wrought aluminium and aluminium alloy extruded round bars having diameters in the range from 8 mm up to 350 mm; and square and hexagonal bars having widths across flats in the range from 10 mm up to 220 mm. It applies to extruded round, square and hexagonal bars. | 2016-08-12 | The Uganda National Bureau of standards | 03 September 2016 | |
| US ISO 6362-3:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 3: Extruded rectangular bars — Tolerances on shape and dimensions | This Uganda Standard specifies the tolerances on dimensions and shape of wrought aluminium and aluminium alloy extruded rectangular bars, having thicknesses in the range from 2 mm up to 240 mm and widths in the range from 10 mm up to 600 mm. It applies to extruded rectangular bars. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
| US ISO 6362-4:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 4: Profiles — Tolerances on shape and dimensions | This Uganda Standard specifies the tolerances on dimensions and shape of wrought aluminium and aluminium alloy extruded profiles with a cross-section contained within a circumscribing circle not greater than 800 mm. This part of US ISO 6362 applies to extruded profiles for general engineering applications only. | 2016-08-12 | The Uganda National Bureau of standards | The Uganda Gazette Vol. CVIII No. 57 | 03 September 2016 |
