English
FrançaisRegulations
Page 7 of 140, showing 20 records out of 2786 total, starting on record 121, ending on 140
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| Bitumen roofing felt | 1978-01-13 | Standards Assocaition of zimbabwe | statutory instrument 41 of 1978 | 01 October 2016 | |
| Bitumen roofing felts | Covers three types of bituminous felt and two types of glass fibre tissue based felt classed according to mass per square metre. | 1978-01-13 | Statutory Instrument 41 of 1978 | 19 September 2016 | |
| Bitumen roofing felts | 1978-01-13 | Standards Assocaition of zimbabwe | Statutory Instrument 41 of 1978 | 01 October 2016 | |
| Bitumen roofing felts | 1978-01-13 | Standards Assocaition of zimbabwe | statutory instrument 41 of 1978 | 01 October 2016 | |
| Boat (Import, Registration and Movement) Regulations | "16. Ports of entry Only those ports of entry, places of inspection and treatment which are listed in the Fourth Schedule hereto may be used for importation of any boat or aquatic apparatus. FOURTH SCHEDULE (Regulation 4) PART 1 ZONES Zone Title Zonal Referenc e Mark Description of Zone (See Note below) Registering Officer Kwando/Linyanti KL The entire Kwando / Linyanti river system including the Selinda Spillway (or Magweqana), lying to the east of the meridian of eastern longitude of 23°25´00 and the Savuti River and marsh and excluding Lake Iyambezi Dept. of Water Affairs Private Bag 2, Maun Chobe CH The entire Chobe river system including Lake lyambezi Dept. of Water Affairs, Kasane Okavango OK The entire Okavango river system including the whole Okavango Delta, Lake Ngami, the Boteti River, Mababe Marsh and Ntwetwe pan but excluding the Selinda Spillway (or Magweqana) lying to the east of the meridian of eastern longitude 23°25´00 and the Savuti River or marsh Nata NS The entire river systems of the Nata, Sibanini, Maitengwe, Nkange, Tutume, Semowane, Mosetse, Lepashe, Mosope rivers and Sua Pan. Dept. of Water Affairs, Francistown. Limpopo LP The entire river systems of tributaries of the Limpopo River lying to the north of the Dibete Quarantine fence between Buffels Drift and Lephepe. Dept. of Water Affairs, Francistown. Marico MR The entire river systems of tributaries of the Marico River lying to the south of the Dibete Quarantine fence between Buffels Drift and Lephepe. Dept. of Water Affairs, Gaborone. NOTE: The exact boundaries of the zones are shown on Survey Plan No BT. 243 deposited with the Director of Surveys and Lands. PART 2 PORTS OF ENTRY, PLACES OF INSPECTION AND TREATMENT (reg 16) Ports of Entry and Places where inspection and treatment of boats and aquatic apparatus may be carried out: Ports of Entry (Rail): Gaborone Francistown Ports of Entry (Air): Gaborone Francistown Maun Kasane Ports of Entry (Road): Kazungula (Ferry) Kazungula (Road) Martins Drift Ramatlabama Ramokgwebana Tlokweng Gate Pioneer Gate (Lobatse) Ngoma Bridge Mamuno Road Mohembo Places where inspection and treatment can be carried out: Copyright Government of Botswana Gaborone: Water Affairs Department Francistown: Water Affairs Department Maun: Water Affairs Department Kasane: Water Affairs Department Lobatse: Water Affairs Department" | 1986-10-01 | Laws of Botswana Chapter 50:1 | 28 July 2023 | |
| Boat (Import, Registration and Movement) Regulations | "15. Procedure for obtaining import permit (1) An owner wishing to import a boat or aquatic apparatus into Botswana shall submit to the Director of Water Affairs, an application for boat registration and import permit, which shall be completed by the owner to the satisfaction of the Director of Water Affairs." | 1986-10-01 | Laws of Botswana Chapter 50:1 | 28 July 2023 | |
| Boat (Import, Registration and Movement) Regulations | "14. From the date of the commencement of these Regulations no boat or mokoro or aquatic apparatus may be imported into Botswana unless the owner thereof is in possession of an import permit as prescribed under these Regulations" | 1986-10-01 | Laws of Botswana Chapter 50:1 | 28 July 2023 | |
| Boat (Import, Registration and Movement) Regulations | "15. Procedure for obtaining import permit (1) An owner wishing to import a boat or aquatic apparatus into Botswana shall submit to the Director of Water Affairs, an application for boat registration and import permit, which shall be completed by the owner to the satisfaction of the Director of Water Affairs. (2) The Director of Water Affairs may issue an import permit and registration certificate and may prescribe such conditions as to the route to be followed by the boat as he may deem necessary and requiring inspection and treatment to be carried out on such boat or aquatic apparatus: Provided that any breach of such conditions shall render the permit invalid and the boat or aquatic apparatus subject to confiscation or destruction. (3) Fees for the issue of an import permit shall be paid as set out in the Tenth Schedule hereto. Tenth Schedule Issue of import permit No Charge Issue of registration certificate P25,00 Issue of duplicate certificate of registration P2,00 Fee for carrying out all inspections and treatments specified on an import permit P10,00" | 1996-10-01 | Laws of Botswana Chapter 50:1 | 28 July 2023 | |
| Boat (Import, Registration and Movement) Regulations | 1986-10-01 | Ministry of Trade and Industry | Laws of Botswana Chapter 50:1 | 29 July 2023 | |
| Bonemeal, Bloodmeal and Carcassmeal (Export Duty) Act | An Act to impose an export duty in respect of bonemeal, bloodmeal and carcassmeal and to provide for matters incidental thereto. | 1962-01-01 | Attorney General’s Chambers | Laws of Botswana Chapter 51:02 | 02 April 2016 |
| BOS 116:2011 Pneumatic tyres for passenger cars and their trailers - specifications | It covers new pneumatic tyres for private passenger cars and their trailers. It does not apply to tyres designed for: a) the equipment of vintage cars, b) racing purposes, and c) speeds exceeding 300 km/h Determines dimensions of tyres, load/speed performance test | 2011-06-11 | Botswana Bureau of Standards | Standards (Import Inspection) Regulations, 2008 | 19 September 2016 |
| BOS 117: 2011 2nd ed. Pneumatic tyres for commercial vehicles and their trailers – Specification | This specification covers new pneumatic tyres primarily designed for use by all road vehicles. It does not however, apply to, a) new tyres for private (passenger) cars and their trailers, b) tyres of a speed category below 80km/h, or c) tyres designed for cycles and motor cycles. | 2011-07-20 | Botswana Bureau of Standards | Standards (Import Inspection) Regulations, 2008 (SIIR) | 13 July 2017 |
| BOS 118:2005 Single stage low- pressure regulators for liquefied petroleum gas (LPG) Specification | This standard specifies This standard specifies performance, safety and constructional requirements for low-pressure regulators of the single-stage type intended for use with liquefied petroleum gas mixtures in the vapour phase and designed for a set outlet pressure of 2.8 kPa and a flow not exceeding 10 kg/h. single-stage type intended for use with liquefied petroleum gas mixtures in the vapour phase and designed for a set outlet pressure of 2.8 kPa and a flow not exceeding 10 kg/h. | 2005-03-11 | Botswana Bureau of Standards | Standards (Import Inspection) Regulations, 2008 (SIIR) | 13 July 2017 |
| BOS 158: 2011 2nd ed. High penetration – resistant laminated safety glass for vehicles – Specification | This Botswana Standard covers high penetration-resistant laminated safety glass including bulletresistant glazing materials for use in vehicles. Note: When relevant, the provision of flat safety glass specimens for the tests in 7.6, 7.7, and 7.8 is a matter of agreement between the manufacturer and the purchaser. | 2011-01-28 | Botswana Bureau of Standards | Standards (Import Inspection) Regulations, 2008 (SIIR) | 14 July 2017 |
| BOS 159: 2011 2nd ed. Laminated safety glass for vehicles – Specification | This Botswana Standard covers laminated safety glass (excluding windscreens) for use in vehicles. | 2011-01-28 | Botswana Bureau of Standards | Standards (Import Inspection) Regulations, 2008 (SIIR) | 14 July 2017 |
| BOS 160: 2011 2nd ed. Toughened safety glass for vehicles – Specification | 1. Optical and physical requirements of the glass are defined 2. Marking each toughed safety glass product shall be distinctly marked 3. Sampling and compliance with specification required | 2011-01-28 | Botswana Bureau of Standards | Standards (Import Inspection) Regulations, 2008 (SIIR) | 14 July 2017 |
| BOS 186:2006 Plastic carrier bags and flat bags – Specification | This standard specifies requirements for carrier bags and flat bags that are made from thermo-plastic materials for use within the Republic of Botswana. This standard covers the following; domestically produced and imported plastic carrier bags, flat bags, printing requirements and the thickness of these bags. This standard does not cover the following; bread bags, refuse bags, bin liners, household plastic bags or primary packaging such as barrier bags. | 2006-01-18 | Botswana Bureau of Standards | Standards (Import Inspection) Regulations, 2008 (SIIR) | 13 July 2017 |
| BOS 196: 2006 Fire extinguishing media- Powders- Specification | A person shall not unload for the Botswana market, any fire extinguishing media powders which does not meet the requirements of BOS 196 | 2006-08-18 | Botswana Bureau of Standards | Standards (Import Inspection) Regulations, 2008 (SIIR) | 13 July 2017 |
| BOS 201: 2006 Cereals and pulses – Certain pulses – Specification | This Standard specifies Quality factors, maximum residue limits, labelling and packaging for the whole, shelled or split pulses defined below which are intended for human consumption. The following pulses are covered by this standard: beans of the Phaseolus spp; lentils; peas; chickpeas; field beans; cowpeas; jugo bean; mung bean; groundnut/ peanut; soybean. | 2006-05-09 | Botswana Bureau of Standards | Standards (Import Inspection) Regulations, 2008 (SIIR) | 13 July 2017 |
| BOS 245:2008 Chemical resistant gloves | - Thickness of the gloves - Design of gloves - Packing and marking - Sampling and compliance - Inspection and test methods | 2008-09-12 | Botswana Bureau of Standards | Standards (Import Inspection) Regulations, 2008 (SIIR) | 14 July 2017 |
