Regulations

Page 139 of 140, showing 20 records out of 2786 total, starting on record 2761, ending on 2780

Title Description Implementation date Source Publication Created
US 1570:2014, Standard consumer safety specification for soft infant and toddler carriers This Uganda Standard establishes performance requirements, test methods and marking requirements to promote safe use of soft infant and toddler carriers. 0000-00-00 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 04 October 2016
US 1574:2014, Standard performance specification for towel products for institutional and household use This Uganda Standard covers the evaluation of specific performance characteristics of importance in woven and knitted kitchen towel, dishcloth, crash towel, huck towel, washcloth, hand towel, bath towel, and bath sheet products for use in institutional and household environments. 2015-04-21 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 04 October 2016
US ISO 32:1977, Gas cylinders for medical use — Marking for identification of content This Uganda Standard establishes a system of marking and a series of colours for the identification of the content of gas cylinders intended for medical use only. 2015-04-21 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 04 October 2016
US 971-4:2014, Liquefied Petroleum Gases (LPG) — Part 4: Specification This Uganda Standard specifies the requirements and methods of sampling and test for those products commonly referred to as liquefied petroleum gases, consisting predominantly of C3 hydrocarbons (propane/propene); C4 hydrocarbons (butane/butene); and mixtures of C3 and C4 hydrocarbons. 2015-04-21 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 04 October 2016
US ISO 2928: 2003, Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2.5 MPa) — Specification This Uganda Standard specifies requirements for rubber hoses and rubber hose assemblies used for the transfer of liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas and designed for use at working pressures ranging from vacuum to a maximum of 25 bar (2.5 MPa) within the temperature range 30 °C to +70 °C or, for low-temperature hoses (designated -LT), within the temperature range −50 °C to +70 °C. 2015-04-21 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 04 October 2016
US ISO 2928: 2003, Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2.5 MPa) — Specification This Uganda Standard specifies requirements for rubber hoses and rubber hose assemblies used for the transfer of liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas and designed for use at working pressures ranging from vacuum to a maximum of 25 bar (2.5 MPa) within the temperature range 30 °C to +70 °C or, for low-temperature hoses (designated -LT), within the temperature range −50 °C to +70 °C. 2015-04-21 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 04 October 2016
US ISO 7225:2005, Gas cylinders — Precautionary labels This Uganda Standard specifies the design, content (that is, hazard symbols and text) and application of precautionary labels intended for use on individual gas cylinders containing single gases or gas mixtures. Labels for cylinders of bundles and labels for bundles are not covered by this standard.. 2015-04-21 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 04 October 2016
US ISO 11119-1: 2012, Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l This Uganda Standard specifies requirements for composite gas cylinders and tubes between 0.5 l and 450 l water capacity, for the storage and conveyance of compressed or liquefied gases. This standard applies to type 2 hoop wrapped cylinder or tube with a load-sharing metal liner and composite reinforcement on the cylindrical portion only. This standard is limited to cylinders and tubes with composite reinforcement of carbon fibre, aramid fibre or glass fibre (or a mixture thereof) within a matrix or steel wire to provide circumferential reinforcement. 2015-04-21 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 04 October 2016
US ISO 11119-2: 2012, Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners This Uganda Standard specifies requirements for composite gas cylinders and tubes between 0.5 l and 450 l water capacity, for the storage and conveyance of compressed or liquefied gases. This standard applies to type 3 fully wrapped cylinders or tubes with a load-sharing metal liner and composite reinforcement on both the cylindrical portion and the dome ends. This standard is limited to cylinders and tubes with composite reinforcement of carbon fibre, aramid fibre or glass fibre (or a mixture thereof) within a matrix. 2015-04-21 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 04 October 2016
US ISO 11119-3: 2013 Gas cylinders— Refillable composite gas cylinders and tubes Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with non-load –sharing metallic or non-metallic liners This Uganda Standard specifies requirements for composite gas cylinders up to 150 l water capacity and composite tubes above 150 l water capacity and up to 450 l water capacity, for the storage and conveyance of compressed or liquefied gases. This standard does not address the design, fitting and performance of removable protective sleeves. . 2015-04-21 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 04 October 2016
US ISO 14245:2006, Gas cylinders — Specification and testing of LPG cylinder valves — Self closing This Uganda Standard specifies the requirements for design, specification and type testing for dedicated LPG self-closing cylinder valves specifically for use with transportable refillable LPG cylinders from 0,5 l up to 150 l water capacity. It includes references to associated equipment for vapour or liquid service. 2015-04-21 The Uganda National Bureau of standards UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015 04 October 2016
The vaue added tax Act No 5 of 2014 2015-06-06 Tanzania Revenue Authority Value added Tax ( General) regulations, 2015 11 March 2016
Value Added Tax Act An Act to provide for the imposition and collection of Value Added Tax; and to provide for matters relating to or incidental to Value Added Tax 2005-08-12 Malawi Revenue Authority Value Added Tax Act 14 December 2015
Welding helmets, shield, goggles and welding spectacles-Specification Specifies requirements for the materials, design and manufacture of welding helmets, hand shields, goggles and welding spectacles that are intended to be used with protective filters, filter covers and backing lenses that comply with appropriate transmittance requirements. 2005-07-01 Malawi Bureau of Standards Welding helmets, shield, goggles and welding spectacles-Specification 29 August 2017
Malawi Bureau of Standards Act Prescribes the requirements for white sugar derived from sugarcane or beet root intended for human consumption without further processing. The fortification requirements in clause 6 apply to sugars sold directly to the final consumer, and sugars used as ingredients in other foodstuffs. 1972-03-01 Malawi Bureau of Standards White sugar - Specification 24 March 2017
Electrical Wiring of Premises (SAZ Wiring Rules) This code of practice is designed to ensure safety in the utilization of electricity in or on premises and covers, design, selection, erection, inspection and testing of electrical installations. 1961-09-11 Wiring Rules 11 September 2016
Declaration of Fish and Bees as Animals for purposes of the Animal Diseases Act (Cap. 364) 2012-12-31 Kenya national council for law reporting/FAOLEX [Rev. 2012] CAP. 364 Animal Diseases [Subsidiary 19 February 2017
PROHIBITION AND REGULATION OF IMPORTATION UNDER SECTION 8 [Cap. 213 (1948), Sub. Leg.] 2012-12-31 Kenya national council for law reporting/FAOLEX [Rev. 2012] CAP. 364 Animal Diseases [Subsidiary] 19 February 2017
FEES AND PAYMENTS PRESCRIBED UNDER SECTION 15 2012-12-31 Kenya national council for law reporting/FAOLEX [Rev. 2012] CAP. 364 Animal Diseases [Subsidiary 19 February 2017
Prohibition of importation of Live sheep& Goat ( LN 114/2011 In exercise of the powers conferred by section 8 of the Animal Diseases Act, the Director of Veterinary Services prohibits the importation of live sheep and goats from countries infected with scrapie, caprine arthritis/encephalitis and bovine spongiform encephalopathy 2011-01-01 Kenya national council for law reporting/FAOLEX [Rev. 2012] CAP. 364 Animal Diseases [Subsidiary 14 March 2017
1 2 3...136 137 138 139 140