English
FrançaisRegulations
Page 137 of 140, showing 20 records out of 2786 total, starting on record 2721, ending on 2740
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US EAS 853-2:2016, Auto-refinishing paint — Specification — Part 2: Nitrocellulose resin based | This Uganda Standard specifies the requirements, sampling and test methods for auto-refinishing paint, nitrocellulose resin based. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US EAS 854:2016, Thinner for nitrocellulose resin-based paints and lacquers — Specification | This Uganda Standard specifies requirements, sampling and test methods for thinners for nitro-cellulose resin based paints and lacquers. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US EAS 855:2016, Thinner for synthetic resin based auto-refinishing paints — Specification | This Uganda Standard specifies requirements, sampling and test methods for thinners for synthetic resin based auto-refinishing paints. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US EAS 856: 2016, 2-Pack acrylic resin based auto-refinishing paint — Specification | This Uganda Standard specifies requirements, sampling and test methods for thinners for 2-Pack acrylic resin based auto-refinishing paint. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US EAS 857:2016, Thinner for acrylic resin based auto-refinishing paints — Specification | This Uganda Standard specifies requirements, sampling and test methods for thinner for acrylic resin based auto-refinishing paints. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 10417:2004, Petroleum and natural gas industries — Subsurface safety valve systems — Design, installation, operation and redress | This Uganda Standard establishes requirements and provides guidelines for configuration, installation, test, operation and documentation of subsurface safety valve (SSSV) systems. In addition, this standard establishes requirements and provides guidelines for selection, handling, redress and documentation of SSSV downhole production equipment. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 10425:2003, Steel wire ropes for the petroleum and natural gas industries — Minimum requirements and terms of acceptance | This Uganda Standard specifies the minimum requirements and terms of acceptance for the manufacture and testing of steel wire ropes not exceeding rope grade 2160 for the petroleum and natural gas industries. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 10432:2004, Petroleum and natural gas industries — Downhole equipment — Subsurface safety valve equipment | This Uganda Standard provides the minimum acceptable requirements for subsurface safety valves (SSSVs). It covers subsurface safety valves including all components that establish tolerances and/or clearances which may affect performance or interchangeability of the SSSVs. It includes repair operations and the interface connections to the flow control or other equipment, but does not cover the connections to the well conduit. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO/TS 16530-2:2014, Well integrity — Part 2: Well integrity for the operational phase | This Uganda Standard provides requirements and methods to the oil and gas industry to manage well integrity during the well operational phase. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 15156-2:2015, Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons | This Uganda Standard gives requirements and recommendations for the selection and qualification of carbon and low-alloy steels for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards or regulations. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 15156-3:2015, Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys | This Uganda Standard gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards, or regulations. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 15551-1:2015, Petroleum and natural gas industries — Drilling and production equipment — Part 1: Electric submersible pump systems for artificial lift | This Uganda Standard provides requirements for the design, design verification and validation, manufacturing and data control, performance ratings, functional evaluations, handling, and storage of tubing-deployed electrical submersible pump (ESP) systems as defined herein. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 17348:2016, Petroleum and natural gas industries — Materials selection for high content CO2 for casing, tubing and downhole equipment | This Uganda Standard provides guidelines and requirements for material selection of both seamless casing and tubing, and downhole equipment for CO2 gas injection and gas production wells with high pressure and high CO2 content environments [higher than 10 % (molar) of CO2 and 1 MPa CO2 partial pressure]. Oil production wells are not covered in this standard. This standard only considers materials compatibility with the environment. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 17824:2009, Petroleum and natural gas industries — Downhole equipment — Sand screens | This Uganda Standard provides the requirements and guidelines for sand control screens for use in the petroleum and natural gas industries. Included are the requirements for design, design validation, functional evaluation, manufacturing, storage and transport. The requirements of this standard are applicable to wire-wrap screens, pre-pack screens and metal-mesh screens as defined herein. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 10437:2003, Petroleum, petrochemical and natural gas industries — Steam turbines — Special-purpose applications | This Uganda Standard specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of steam turbines for special-purpose applications. It also covers the related lube-oil systems, instrumentation, control systems and auxiliary equipment. It is not applicable to general-purpose steam turbines, which are covered in ISO 10436. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 10441:2007, Petroleum, petrochemical and natural gas industries — Flexible couplings for mechanical power transmission — Special-purpose applications | This Uganda Standard specifies the requirements for couplings for the transmission of power between the rotating shafts of two machines in special-purpose applications in the petroleum, petrochemical and natural gas industries. Such applications are typically in large and/or high speed machines, in services that can be required to operate continuously for extended periods, are often unspared and are critical to the continued operation of the installation. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 13691:2001, Petroleum and natural gas industries — High-speed special-purpose gear units | This Uganda Standard specifies the minimum requirements for enclosed, precision, single and double helical, one- and two-stage speed increasers and reducers of parallel shaft design with pinion speeds of 3000 min−1 or greater, or pitch line velocities of 25 m/s or greater, for special purpose applications. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 15547-1:2005, Petroleum, petrochemical and natural gas industries — Plate-type heat exchangers — Part 1: Plate-and-frame heat exchangers | This Uganda Standard gives requirements and recommendations for the mechanical design, materials selection, fabrication, inspection, testing, and preparation for shipment of plate-and-frame heat exchangers for use in petroleum, petrochemical and natural gas industries. It is applicable to gasketed, semi-welded and welded plate-and-frame heat exchangers | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 15547-2:2005, Petroleum, petrochemical and natural gas industries — Plate-type heat exchangers — Part 2: Brazed aluminium plate-fin heat exchangers | This Uganda Standard gives requirements and recommendations for the mechanical design, materials selection, fabrication, inspection, testing, and preparation for shipment of brazed aluminium plate-fin heat exchangers for use in petroleum, petrochemical and natural gas industries | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US 1575:2016, Occupational Safety for Onshore oil and gas production operations — Requirements | This Uganda Standard covers occupational safety practices that apply to oil and gas production operations during drilling, well servicing and work over operations to ensure occupational safety of personnel within the oil and gas sector and/or industry. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
