Regulations

Page 136 of 140, showing 20 records out of 2786 total, starting on record 2701, ending on 2720

Title Description Implementation date Source Publication Created
Diesel Specifies two grades of automobile diesel fuel suitable for use in compression ignition engines including high-speed engines 2016-02-22 10 September 2016
Natural Mineral Water and Spring Water Applies to natural mineral water and spring water for human consump-tion. 2002-09-16 Standards Assocaition of zimbabwe 11 September 2016
US IEC 60245-3:1994, Rubber insulated cables — Rated voltages up to and including 450/750 V — Part 3: Heat resistant silicone insulated cables This Uganda Standard details the particular specifications for silicone rubber insulated cables of rated voltage of 300/500 V. Each cable should comply with the appropriate requirements given in IEC 245-1 and the particular requirements of this part. (This Uganda Standard cancels and replaces, US EAS 503-3:2008, Rubber insulated cables — rated voltages up to and including 450/750 V — Part 3: Heat resistant silicone insulated cables, which has been republished). 2015-08-07 The Uganda National Bureau of standards 23 August 2016
13 A Plugs, socket-outlets, Adaptors and connection units: Part 2 Switched and unswitched socket-outlet Specifies requirements for 13 A switched and unswitched shuttered sockets-outlets for household, commercial and light industrial purposes with particularreferences to safety in normal use. 1976-05-28 Standards Assocaition of zimbabwe 11 September 2016
Household and similar electrical Deals with the safety of electrical appliance for household and similar purposes, their rated voltage being not more than 250 V for single phase appliances and 480 V for other appliances. 1961-09-11 11 September 2016
Steel Fencing Material Covers barbed wire; fencing standards; droppers; galvanized wire; gate-posts; gates and straining posts. Materials complying with this standard meet the requirements of the Zimbabwe Fencing Act. 1977-01-28 13 September 2016
US IEC 60502-1:2009, Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV) This Uganda Standard specifies the construction, dimensions and test requirements of power cables with extruded solid insulation for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV) for fixed installations such as distribution networks or industrial installations. (This Uganda Standard cancels and replaces, US EAS 506-1:2008, Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1.2 kV) up to 30 kV (Um = 36 kV) — Part 1: Cables for rated voltages of 1 kV (Um = 1.2 kV) and 3 kV (Um = 3.6 kV), which has been republished). 2015-08-07 The Uganda National Bureau of standards 24 August 2016
Hydraulic brake fluids Covers requirements for DOT 3 and DOT 4 fluids in hydraulic brake system of motor vehicles, containers of these fluids and labeling of the containers 2015-12-07 Standards Assocaition of zimbabwe 14 September 2016
Safety Factors and Smoke emission of Domestic Stoves Burning Solid Fuels at a rate not Exceeding 5Kg per hour Covers the smoke emission and certain safety factors of domestic stoves burning solid fuels. Quality of manufacture and general performance not included. 1976-07-01 Standards Assocaition of zimbabwe 14 September 2016
Earthenware drain and sewer pipes and fittings Covers vitrified clay pipes suitable for jointing by the following meth-ods: mortar caulking; rolling rubber ring; bitumen run; reformed facto-ry-applied; plain-end pipe; slip seal rubber. Jointing methods are not covered in the specification. 1980-03-07 14 September 2016
Components of Pressure Pipe Systems: Unplasticised Poly (Vinyl Chloride) Pressure pipe system Specifies requirements for unplasticised poly (vinyl chloride) (PVC-U pipes and injection molded fittings intended for above-ground and be-low ground pressure applications for the conveyance of potable water in reticulation systems, and for other applications in which continuous temperatures in excess of 25 oC are not encounted. 1981-06-05 Standards Assocaition of zimbabwe 14 September 2016
Cast-Iron pipes and pipe fittings for use above ground in drainage installations Covers the requirements for low pressure cast-iron pipes and pipe fit-tings, intended for use above ground as soil water, waste water and vent pipes. 1981-06-05 Standards Assocaition of zimbabwe 14 September 2016
Code of practice for design and construction Gives recommendations for the structural use of concrete in buildings and structures, excluding bridges and structural concrete made with high alumina cement. 1981-06-05 Standards Assocaition of zimbabwe 14 September 2016
Fire doors and Fire-Shutters Specifies the requirements for four classes of fire door and fire shutter assembled and two classes of fire doors and fire shutters that are in-tended to close permanent openings in walls or partitions, to provide a fire resistance of 30 mins or more in order to stop the spread of fire and to limit the spread of smoke. 1981-06-05 Standards Assocaition of zimbabwe 15 September 2016
Fire-Doors and Fire-Shutters Specifies the requirements for four classes of fire door and fire shutter assembled and two classes of fire doors and fire shutters that are in-tended to close permanent openings in walls or partitions, to provide a fire resistance of 30 mins or more in order to stop the spread of fire and to limit the spread of smoke. 1981-06-05 15 September 2016
The Storage, Transport and use of small quantities of flammable liquids Covers flammable liquids up to a maximum of 44 000 litres including industrial solvents, petroleum and petroleum products, other than liquefied petroleum gases. 1985-10-25 Standards Assocaition of zimbabwe 15 September 2016
Unplasticized polyvinl chloride (UPVC) components for external rainwater system The specification covers unplasticized polyvinyl chloride (UPVC_ rainwater system components of different types and intended for exter-nal applications 1978-01-13 15 September 2016
Government Gazette Vol. L, No. 25 2012-05-04 16 September 2016
US ISO 6362-6:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 6: Round, square, rectangular and hexagonal tubes — Tolerances on shape and dimensions This Uganda Standard specifies the tolerances on dimensions and shape of wrought aluminium and aluminium alloy extruded round bars having diameters in the range from 8 mm up to 350 mm; and square and hexagonal bars having widths across flats in the range from 10 mm up to 220 mm. It applies to extruded round, square and hexagonal bars. 2016-08-12 The Uganda National Bureau of standards 03 September 2016
Basmati Rice (Control of Sale) Regulations 2012 2012-06-01 Ministry of Industry, Commerce and Consumer Protection (Mauritius) 20 September 2016
1 2 3...134 135 136 137 138 139 140