English
FrançaisRegulations
Page 106 of 140, showing 20 records out of 2786 total, starting on record 2101, ending on 2120
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US ISO 15547-2:2005, Petroleum, petrochemical and natural gas industries — Plate-type heat exchangers — Part 2: Brazed aluminium plate-fin heat exchangers | This Uganda Standard gives requirements and recommendations for the mechanical design, materials selection, fabrication, inspection, testing, and preparation for shipment of brazed aluminium plate-fin heat exchangers for use in petroleum, petrochemical and natural gas industries | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US 1575:2016, Occupational Safety for Onshore oil and gas production operations — Requirements | This Uganda Standard covers occupational safety practices that apply to oil and gas production operations during drilling, well servicing and work over operations to ensure occupational safety of personnel within the oil and gas sector and/or industry. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 9241-391:2016, Ergonomics of human-system interaction — Part 391: Requirements, analysis and compliance test methods for the reduction of photosensitive seizures | This Uganda Standard provides requirements and recommendations for reducing photosensitive seizures (PSS), while viewing images on electronic displays. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 14122-1:2016, Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access | This Uganda Standard gives general requirements for access to stationary machines and guidance about the correct choice of means of access when necessary access to the stationary machine is not possible directly from the ground level or from a floor. It is applicable to permanent means of access which are a part of a stationary machine, and also to non-powered adjustable parts (e.g. foldable, slidable) and movable parts of fixed means of access. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 14122-2:2016, Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways | This Uganda Standard gives requirements for non-powered working platforms and walkways which are a part of a stationary machine, and to the non-powered adjustable parts (e.g. foldable, sliding) and movable parts of those fixed means of access. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 14122-3:2016, Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails | This Uganda Standard gives requirements for non-powered stairs, stepladders and guard-rails which are a part of a stationary machine, and to the non-powered adjustable parts (e.g. foldable, slidable) and movable parts of those fixed means of access. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 14122-4:2016, Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders | This Uganda Standard gives requirements for fixed ladders which are a part of a stationary machine, and to the non-powered adjustable parts (e.g. foldable, slidable) and movable parts of fixed ladder systems. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 17916:2016, Safety of thermal cutting machines | This Uganda Standards pecifies the safety requirements and measures for machinery covering design, construction, production, transport, installation, operation, maintenance, and putting out of service. This standard applies to machinery using thermal cutting and or marking processes such as oxy-fuel, plasma arc. This standard applies to machinery the basis of which is either designed as open gantry, cantilever machine, or the track of which is incorporated in the cutting table. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 18158:2016, Workplace air – Terminology | This Uganda Standard specifies terms and definitions that are related to the assessment of workplace exposure to chemical and biological agents. These are either general terms or are specific to physical and chemical processes of air sampling, the analytical method, or method performance. The terms included are those that have been identified as being fundamental because their definition is necessary to avoid ambiguity and ensure consistency of use. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 20187:2016, Inflatable play equipment — Safety requirements and test methods | This Uganda Standard is applicable to inflatable play equipment intended for use by children up to 14 years of age individually and as a group activity. This standard specifies safety requirements for inflatable play equipment for which the primary activities are bouncing and sliding. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 24505:2016, Ergonomics — Accessible design — Method for creating colour combinations taking account of age-related changes in human colour vision | This Uganda Standard provides a method for creating conspicuous colour combinations for use in visual signs and displays taking into account viewer age. It is based on the perceived similarity of colours at photopic and mesopic lighting conditions. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| The Uganda Wild Life Act Chapter 200 | 1996-08-01 | The Ministry of Water and Environment | The Uganda Wild Life Act Chapter 200 | 03 June 2018 | |
| Uganda Wildelife Bill 2017 | 2017-06-08 | Minister of Tourism, Wildlife and Antiquities | The UGANDA Wildelife Bill 2017 | 13 June 2018 | |
| Plant protection ACt No 13 of 1997 | An Act to make provisions for consolidation of the Plant Protection Act, to prevent the introduction and spread of harmful organisms, to ensure sustainable plant and environmental protection, to control the importation and use of plant protection substances, to regulate export and imports of plants and plant products and ensure the fulfilment of international commitments, to entrust all plant protection regulatory functions to the Government, and for matters incidental thereto or connected therewith | 1997-07-04 | Ministry of Agriculture | THE UNITED REPUBLIC OF TANZANIA Acts Supplement to the Gazette ISSN 0856-0331X | 23 February 2016 |
| The tropical pesticides Research Institute Act No 18 of 1979 | An act to establish the Tropical Pesticides Research Institute, to provide for the research and pesticides control, the functions of the Institute and for the matters connected with and incidental to the establishment of the Institute. | 1979-12-08 | THE TROPICAL PESTICIDES RESEARCH INSTITUTE | THE UNITED REPUBLIC OF TANZANIA ,THE TROPICAL PESTICIDES RESEARCH INSTITUTE ACT, 1979 | 27 February 2016 |
| Seeds (Regulation of Standards) Act, No 29 of 1973 | An Act to make provision for the control and regulation of agriculture seed standards and for maters connected therewith and incidental thereto [ .......................................] ENACTED by the Parliament of the United Republic of Tanzania | 1973-12-06 | Ministry of Agriculture/Tanzania official certification Agency | THE UNITED REPUBLIC OF TANZANIA,Seed (Regulation of Standards), 1975 | 27 February 2016 |
| The Wildlife and National Parks Act 1993 | An Act To amend and consolidate the law relating to the conservation and management of wildlife and to provide for the preservation of National Parks | 1994-03-01 | Attorney General | The Wildlife and National Parks Act 1993 | 13 May 2016 |
| WILDLIFE CONSERVATION AND MANAGEMENT (BIO-PROSPECTING) REGULATIONS, 2016 | An Act of Parliament to provide for the protection, conservation, sustainable use and management of wildlife in Kenya and for connected purposes | 2016-01-01 | Ministry of Environment and Forestry | THE WILDLIFE CONSERVATION AND MANAGEMENT ACT | 19 June 2019 |
| WILDLIFE CONSERVATION AND MANAGEMENT (LICENSING AND WILDLIFE USER RIGHTS) REGULATIONS, 2015 | The objectives of these Regulations is to provide for dealership, wildlife transactions, import, export or re-export and or trade in wildlife species. | 2015-01-01 | Ministry of Environment and Forestry | THE WILDLIFE CONSERVATION AND MANAGEMENT ACT | 20 June 2019 |
| WILDLIFE CONSERVATION AND MANAGEMENT (MARINE PROTECTED AND MARINE CONSERVATION AREAS) REGULATIONS, 2016 | Management of marine conservation and protected areas. | 2016-01-01 | Ministry of Environment and Forestry | THE WILDLIFE CONSERVATION AND MANAGEMENT ACT | 20 June 2019 |
