English
FrançaisRegulations
Page 3 of 140, showing 20 records out of 2786 total, starting on record 41, ending on 60
| Title | Description | Implementation date | Source | Publication | Created |
|---|---|---|---|---|---|
| US 310-1:2016, Cement — Part 1: Composition, specification and conformity criteria for common cements (2nd Edition) | This Uganda Standard gives the specifications which include mechanical, physical and chemical requirements of 27 distinct common cements, seven sulphate resisting common cements as well as three distinct low early strength blast furnace cements and two sulphate resisting low early strength blast cements and their constituents. (The Uganda Standardcancels and replaces US 310-1:2001, Cement — Part 1: Composition, specifications, and conformity criteria for common cements, which has been technically revised). | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US 310-2:2016, Cement — Part 2: Conformity evaluation (2nd Edition) | This Uganda Standard specifies the scheme for the assessment and verification of constancy of performance (AVCP) of cements to their corresponding product specification standards, including certification of constancy of performance by a product certification body. (The Uganda Standard cancels and replaces US 310-2:2000, Cement — Part 2: Conformity evaluation, which has been technically revised). | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US EAS 489:2008, Concrete poles for telephone, power and lighting purposes — Specification | This Uganda Standard specifies the characteristics of pre-cast reinforced, partially pre-stressed and pre-stressed concrete poles. Possible uses for the poles include electrical reticulation and distribution, railway traction, telephone line support, street lighting standards and high mast lighting structures. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US EAS 491:2008, Incineration plant for the destruction of hospital waste — Specification | This Uganda Standard specifies the performance requirements for incineration plant, assisted by auxiliary fuel if required, suitable for the destruction of hospital waste. Devices which utilize intensities of combustion exceeding an average heat release rate of 350 W/m3 are not included. This standard does not specify materials or methods of construction. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US EAS 849:2016, Silk (sheen) emulsion paint for interior use — Specification | This Uganda Standard specifies requirements, sampling and test methods for silk (sheen) emulsion paint for interior use. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US EAS 850:2016, Matt solvent-borne paint for interior and exterior use — Specification | This Uganda Standard specifies requirements, sampling and test methods for matt solvent-borne paint for interior and exterior use, intended for application by brush, spray or roller and any other suitable method. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US EAS 851:2016, Matt emulsion paint for interior and exterior use — Specification | This Uganda Standard specifies requirements, sampling and test methods for matt emulsion paint for interior and exterior use. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US EAS 852: 2016, Air-dried roofing paint — Specification | This Uganda Standard specifies requirements, sampling and test methods for solvent-borne air dried roofing paint for use on galvanized iron sheet, zinc and zinc alloy coated steel. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US EAS 853-1:2016, Auto-refinishing paint — Specification — Part 1: Synthetic resin based | This Uganda Standard specifies the requirements, sampling and test methods for auto-refinishing paint, synthetic resin based. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US EAS 853-2:2016, Auto-refinishing paint — Specification — Part 2: Nitrocellulose resin based | This Uganda Standard specifies the requirements, sampling and test methods for auto-refinishing paint, nitrocellulose resin based. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US EAS 854:2016, Thinner for nitrocellulose resin-based paints and lacquers — Specification | This Uganda Standard specifies requirements, sampling and test methods for thinners for nitro-cellulose resin based paints and lacquers. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US EAS 855:2016, Thinner for synthetic resin based auto-refinishing paints — Specification | This Uganda Standard specifies requirements, sampling and test methods for thinners for synthetic resin based auto-refinishing paints. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US EAS 856: 2016, 2-Pack acrylic resin based auto-refinishing paint — Specification | This Uganda Standard specifies requirements, sampling and test methods for thinners for 2-Pack acrylic resin based auto-refinishing paint. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US EAS 857:2016, Thinner for acrylic resin based auto-refinishing paints — Specification | This Uganda Standard specifies requirements, sampling and test methods for thinner for acrylic resin based auto-refinishing paints. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 10417:2004, Petroleum and natural gas industries — Subsurface safety valve systems — Design, installation, operation and redress | This Uganda Standard establishes requirements and provides guidelines for configuration, installation, test, operation and documentation of subsurface safety valve (SSSV) systems. In addition, this standard establishes requirements and provides guidelines for selection, handling, redress and documentation of SSSV downhole production equipment. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 10425:2003, Steel wire ropes for the petroleum and natural gas industries — Minimum requirements and terms of acceptance | This Uganda Standard specifies the minimum requirements and terms of acceptance for the manufacture and testing of steel wire ropes not exceeding rope grade 2160 for the petroleum and natural gas industries. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 10432:2004, Petroleum and natural gas industries — Downhole equipment — Subsurface safety valve equipment | This Uganda Standard provides the minimum acceptable requirements for subsurface safety valves (SSSVs). It covers subsurface safety valves including all components that establish tolerances and/or clearances which may affect performance or interchangeability of the SSSVs. It includes repair operations and the interface connections to the flow control or other equipment, but does not cover the connections to the well conduit. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO/TS 16530-2:2014, Well integrity — Part 2: Well integrity for the operational phase | This Uganda Standard provides requirements and methods to the oil and gas industry to manage well integrity during the well operational phase. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 15156-2:2015, Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons | This Uganda Standard gives requirements and recommendations for the selection and qualification of carbon and low-alloy steels for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards or regulations. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
| US ISO 15156-3:2015, Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys | This Uganda Standard gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards, or regulations. | 2017-02-03 | The Uganda National Bureau of standards | The Uganda Gazette, Vol. CX No. 7 | 22 March 2017 |
